Series 2105 – TTS Tubing Bridge Plug (10K)
General
The TTS Tubing Bridge Plug is designed with a few defining features that differentiate it from the conventional cast iron plugs currently on the market. It utilizes a specially designed Ecner Array elastomer system to provide structural integrity within the sealing element to withstand the differential pressure. This eliminates the fragile slotted metal backups normally employed to support the sealing element in the annular area between the plug and the pipe wall, making for a more robust plug design. The running diameter is smaller than most conventional plugs. Compact and dependable, the TTS Tubing Bridge Plug is easily set via wireline or pipe. Setting force is maintained by a ratcheting lock ring on top of the Bridge Plug.
Features/Benefits
-
Small run –in OD, increases ability to deploy thru and decreases possibility of sticking in tight spots or bends in tubing.
-
No fragile exposed metal backups reduces chance of plug damage which could lead to sticking the plug/setting tool system during deployment.
-
Heat treated slips designed to hold in 13Cr tubulars.
-
Lab testing verified ability to withstand pressure differential of 10,000 psi from both directions while subjecting plug to pressure reversal cycles.
-
Available with bottom adapter Bow Spring Centralizer or other wireline tool.
Specifications
Part Number | Pipe Size |
Weight (ppf) |
Plug O.D. (in) |
ID Setting Range (in) MIN |
ID Setting Range (in) MAX |
Pressure Rating (psi) |
2105-171-AC-001 | 2-3/8" | 4.00 – 5.95 | 1.71 | 1.759 | 2.107 | 10,000psi @ 1.995” I.D. |
2105-209-AC-001 | 2-7/8" | 6.40 – 9.50 | 2.09 | 2.125 | 2.563 | 10,000psi @ 2.441” I.D. |
2105-250-AC-001 | 3-1/2" | 9.30 – 12.95 | 2.50 | 2.530 | 2.810 | 10,000psi @ 2.750” I.D. |
2105-263-AC-001 | 3-1/2" | 5.75 – 10.30 | 2.63 | 2.670 | 3.258 | 10,000psi @ 2.992” I.D. |