Check All | Uncheck All

Sand Control Systems

Series 5100 Inflatable Circulating or Squeeze Gravel Pack System
TTS Thru-Tubing Wash Down Gravel Pack
Series 5000 Thru-Tubing Frac Pack System
Vent Screen with Cement Cap
TTS Thru-Tubing Gravel Pack Screen Hang-Off
Series 5012 One Trip Retrievable Squeeze Pack System
Vent Screen with Isolation Packer and Overshot
TTS Thru-Tubing Perforating Gun and Screen Deployment

Service Tools

LSA–Locking Stinger Assembly
Snap Latch Stinger Assembly
Mechanical Setting Tool (MST) Assembly
Tension Packer Assembly

Product Information Packers-Well Information

Series 5011 Retrievable Packer Accessories
Series 5100 Inflatable Packer
Series 4800 Control Set High Expansion Packer
Series 5011 Retrievable Cement Retainer (Sliding Sleeve)
Series 5011 Retrievable Straddle Pack System
Series 5014 Retrievable Bridge Plug (RBP)
Series 5011 Retrievable Dual Seal Bore Tubing Packer
Series 5011 Retrievable Packer Setting Assemblies
Series 4800-Controlled Set High Expansion Cement Retainer

X-Span Tubing and Casing Patches

Tubing Patch Specifications
Casing Patch Specifications
X-Span Overview
X-Span Advantages and Applications

Workover-Completion Systems

Series 5200 Controlled Volume Displacement System (CVDS)
TTS Tubing Patch Straddle Pack Installation
TTS Thru-Tubing Gas Lift Velocity String Installation

Wireline Products

Series 4025–HPHT Wireline Pressure Setting Tool
Series 7850-ACE Thru Tubing Umbrella Plug
Series 8300-Gravity Bailer
Series 1800-Gage Hanger Retrievable
Series 4010-Wireline Pressure Setting Tool (Power Charge)
Series 1200-Auto Release Tool
Series 7910 Electro-Hydraulic Bailer Bottom (EHBB)
Series 4250-Cast Iron Bridge Plug
Series 4100–Knock Out Magna-Range Bridge Plug
ACE Mix Cement Kits
Series 8299-TTS Flex Bailer Segment
Series 1000-Positive Displacement Bailer
Series 2105-TTS Tubing Bridge Plug (10K)
ACE Mix Cement (6 gallon) Kit Mixing Procedure
TTS Rental Equipment
Series 9306-Spiral Thru Tubing Bridge Plug
Series 4200-Fixed Slip Magna-Range Plug (Pressure Rated)
Series 1201-Selective Release Tool
Tech Unit-ACE Umbrella Plug
Series 4260-Cast Iron Cement Retainer
Series 4020-Hydrostatic Setting Tool (Non-Explosive)

Check All | Uncheck All

Series 1800 – Gage Hanger (Retrievable)


The TTS Thru Tubing Gage Hanger is a slimline retrievable anchor designed to drift minimum ID’s and set a larger pipe sizes below. It can be used as a hanger for downhole tools such as gauges, fluid samplers, or pack-offs. Other applications may be as a barrier (for debris or abandoned tools below) or as a stop or depth marker for subsequent operations.

The slimline design allows for minimal restriction of flow area during production/injection cycles. The standard tool is designed 4-1/2” to 7” casing. Conversion kits allow a single tool to function in a wider range of pipe ID down to 3-1/2” or up to 9-5/8”. Tool retrieval is easily accomplished via wireline using standard pulling tools.


  • Anchor may be removed via wireline.
  • Heat treated slips designed to hold in 13Cr and P-110.
  • Optimized design for maximum annular flow area.
  • Convertible for other pipe ID’s.


Tool OD 2.00 in 50.8 mm
Length 63.9 in 162.31 cm
BHT Rating 400 F 200 C
Setting Range 3.920” – 6.570”
Tensile Strength 19,250 lbs
Annular Flow Area 76% * (in 7”)
Setting Force 4800 lbf
Retrieving Force 3200 lbf
Retrieving Profile 1.75” External Fishneck
Retrieving Tool 2-1/2” JDC
Material AISI 4140

* Flow area% varies for each casing ID