Check All | Uncheck All

Sand Control Systems

Series 5100 Inflatable Circulating or Squeeze Gravel Pack System
TTS Thru-Tubing Wash Down Gravel Pack
Series 5000 Thru-Tubing Frac Pack System
Vent Screen with Cement Cap
TTS Thru-Tubing Gravel Pack Screen Hang-Off
Series 5012 One Trip Retrievable Squeeze Pack System
Vent Screen with Isolation Packer and Overshot
TTS Thru-Tubing Perforating Gun and Screen Deployment

Service Tools

LSA–Locking Stinger Assembly
Snap Latch Stinger Assembly
Mechanical Setting Tool (MST) Assembly
Tension Packer Assembly

Product Information Packers-Well Information

Series 5011 Retrievable Packer Accessories
Series 5100 Inflatable Packer
Series 4800 Control Set High Expansion Packer
Series 5011 Retrievable Cement Retainer (Sliding Sleeve)
Series 5011 Retrievable Straddle Pack System
Series 5014 Retrievable Bridge Plug (RBP)
Series 5011 Retrievable Dual Seal Bore Tubing Packer
Series 5011 Retrievable Packer Setting Assemblies
Series 4800-Controlled Set High Expansion Cement Retainer

X-Span Tubing and Casing Patches

Tubing Patch Specifications
Casing Patch Specifications
X-Span Overview
X-Span Advantages and Applications

Workover-Completion Systems

Series 5200 Controlled Volume Displacement System (CVDS)
TTS Tubing Patch Straddle Pack Installation
TTS Thru-Tubing Gas Lift Velocity String Installation

Wireline Products

Series 4025–HPHT Wireline Pressure Setting Tool
Series 7850-ACE Thru Tubing Umbrella Plug
Series 8300-Gravity Bailer
Series 1800-Gage Hanger Retrievable
Series 8299-Flex Joint
Series 4010-Wireline Pressure Setting Tool (Power Charge)
Series 1200-Auto Release Tool
Series 7910 Electro-Hydraulic Bailer Bottom (EHBB)
Series 4250-Cast Iron Bridge Plug
Series 4100–Knock Out Magna-Range Bridge Plug
ACE Mix Cement Kits
Series 1000-Positive Displacement Bailer
Series 2105-TTS Tubing Bridge Plug (10K)
ACE Mix Cement (6 gallon) Kit Mixing Procedure
TTS Rental Equipment
Series 9306-Spiral Thru Tubing Bridge Plug
Series 4200-Fixed Slip Magna-Range Plug (Pressure Rated)
Series 1201-Selective Release Tool
Tech Unit-ACE Umbrella Plug
Series 4260-Cast Iron Cement Retainer
Series 4020-Hydrostatic Setting Tool (Non-Explosive)

Check All | Uncheck All


Series 5011 Retrievable Dual Seal Bore Tubing Packer

General

The TTS Series 5011 Retrievable DSB Thru-Tubing Packer System is a dual seal bore packer deployable via coiled tubing, jointed pipe, or wireline. Retrieval is accomplished by straight pull to release. It utilizes a proven multi-durometer packing system located above bi-directional caged slips. The standard differential pressure rating is 5000 psi at 300º F. Customizations are available for special sizes, corrosive environments, higher temperature or pressure requirements. Available for tubing sizes 2-3/8” to 5-1/2”.

  • One-trip installation, One-trip retrieve Thru-Tubing Packer.
  • Straight pull to release, no downward manipulation required.
  • Modular Gage Rings allow for optimizing seal gap.
  • Large ID/OD ratio for larger flow area.
  • Dual Bore design allows for full unrestricted ID bore on Seal Bore accessories
  • Bi-Directional caged slips located below the packing system provides increased retrievability.
  • Multi durometer packing system increases sealing ability.
  • Release mechanism is not affected by hanging weight or differential pressures allowing reduction of the required release forces to aid wireline retrieving.
  • Once Packer is released, the tool is locked in the release position allowing the ability to work up and down once released and not re-engage slips.

Applications

  • Straddle packs (tubing patch)
  • Velocity string installations
  • Thru-tubing gas lift system installations
  • GP Screen, Gage, Choke or Shut-in Valve hang-offs
  • Washdown gravel packs
  • Thru-tubing perforating
  • Thru-tubing cement retainer
  • Retrievable Bridge Plug (with accessory equalizing valve/plug)

Specifications

Series 5011 Retrievable Packer System
Tubing Size
(in)
Tubing
(wt)
Length (in) Gage Ring *
(in)
ID Bore
(in)
Max Slip
Range
2-3/8 4.70 42.62 1.810 1.000 2.02
2-7/8 7.80 - 8.60 43.94 2.166 1.250 2.31
2-7/8 6.50 39.97 2.290 1.380 2.45
3-1/2 9.30 - 10.20 45.54 2.725 1.625 3.00
3-1/2 12.70 - 12.95 42.87 2.531 1.380 2.76
4-1/2 10.50 - 13.50 53.27 3.750 2.000 4.10
4-1/2 15.10 53.27 3.650 2.000 4.10
5-1/2 17.0 - 23.0 67.22 4.531 2.812 4.90

NOTE: Other sizes available upon request